ASTM D709-2001(2007) 层压热固材料标准规范

作者:标准资料网 时间:2024-05-10 00:38:11   浏览:8940   来源:标准资料网
下载地址: 点击此处下载
【英文标准名称】:StandardSpecificationforLaminatedThermosettingMaterials
【原文标准名称】:层压热固材料标准规范
【标准号】:ASTMD709-2001(2007)
【标准状态】:现行
【国别】:
【发布日期】:2001
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:D09.07
【标准类型】:(Specification)
【标准水平】:()
【中文主题词】:叠层板材;绝缘;热固性聚合物
【英文主题词】:industriallaminate;thermosettingmoldedshapelaminate;thermosettingroundrodlaminate;thermosettingsheetlaminate;thermosettingtubelaminate
【摘要】:1.1Thisspecificationcoverslaminatedthermosettingmaterialsconsistingoftwoormorepliesorlayersofreinforcingmaterialbondedbyathermosettingsyntheticresin.Examplesofsuchreinforcementarecellulosepaper,cottonfabric,glassfabric,andsyntheticfiberfabrics.Thesematerialsareavailableintheformofsheets,rolledandmoldedtubes,andmoldedrods.1.2Thevaluesstatedininch-poundunitsaretoberegardedasthestandard.Note1ThisspecificationresemblesIEC60893-3intitleonly.Thecontentissignificantlydifferent.Thefollowingsafetyhazardscaveatpertainsonlytothetestmethodsdescribedinthisspecification.Thisstandarddoesnotpurporttoaddressallofthesafetyconcerns,ifany,associatedwithitsuse.Itistheresponsibilityoftheuserofthisstandardtoestablishappropriatesafetyandhealthpracticesanddeterminetheapplicabilityofregulatorylimitationspriortouse.
【中国标准分类号】:G32
【国际标准分类号】:83_140_20
【页数】:34P.;A4
【正文语种】:


下载地址: 点击此处下载
基本信息
标准名称:电气化铁道牵引供电系统术语
中标分类: 铁路 >> 牵引供电 >> 牵引供电综合
替代情况:TB 1677-85
发布部门:中国人民共和国铁道部
发布日期:1997-07-10
实施日期:1998-01-01
首发日期:
作废日期:
主管部门:中国人民共和国铁道部
提出单位:铁道部电气化工程局
归口单位:铁道部电气化工程局
起草单位:铁道部电气化工程局天津电气化勘测设计研究院
起草人:陈玉馥、苏鹏程、张宝兴、徐敦清、丁为民、李汉卿
出版社:中国铁道出版社
出版日期:
页数:20页
适用范围

本标准规定了与电气化铁道牵引供电系统有关的常用术语及其定义。
本标准适用于单相工频交流电气化铁道,接触网额定电压为25kV的牵引供电系统。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 铁路 牵引供电 牵引供电综合
Product Code:SAE J2275
Title:Internal Combustion Engines - Piston Ring-Grooves
Issuing Committee:Piston And Ring Standards Committee
Scope:There is no ISO standard equivalent to this SAE Standard.This SAE standard identifies and defines the most commonly used terms for piston ring-groove characteristics, specifies dimensioning for groove widths, and demonstrates the methodology for calculation of piston groove root diameter.The requirements of this document apply to pistons and rings of reciprocating internal combustion engines and compressors working under analogous conditions, up to and including 200 mm diameter and 4.5 mm width for compression rings and 8.0 mm width for oil rings.The specifications in this document assume that components are measured at an ambient temperature of 20 °C (68 °F).Tolerances specified in this document represent practical functional limits and do not imply process capabilities.